Land Rover Series 2 & 2A & 3 Gearbox

146 Products

Sort by:

NRC2053 - Land Rover Series Round Gearbox Mount - 1958-1984 - Also Fits Engine Mount on 1954-1958

From£2.36(Exc VAT)

Part Number: NRC2053

View Options

NRC2052 - Land Rover Series 2, 2A & 3 Engine Mount - For Diesel Models - Square Type

£2.86(Exc VAT)

Part Number: NRC2052

View Options

FRC4809 - Gearbox Drain Plug Washer for Land Rover Series 3

£1.04(Exc VAT)

Part Number: FRC4809

View Options

600603 - Land Rover Series Gearbox Gasket Set - Fits All Vehicles from 1948-1984

£1.90(Exc VAT)

Part Number: 600603

View Options

231116 - Spring for Reverse Gate - Fits Land Rover Series from 1948-1984 (Priced Individually)

£1.21(Exc VAT)

Part Number: 231116

View Options

78924 - Screw from Speedo Cable to Gearbox on Land Rover Series (Priced Individually)

£0.40(Exc VAT)

Part Number: 78924.G

View Options

571059 - Primary Pinion Oil Seal for Land Rover Series 3

From£1.01(Exc VAT)

Part Number: 571059

View Options

3292 - Oil Filler Plug - For Gearbox and Swivel Housing on Discovery 1, Defender, and Series 2, 2A & 3 Land Rover

£2.03(Exc VAT)

Part Number: 3292.G

View Options

576316 - Land Rover Series Gear Lever Knob - Push on Type

£10.88(Exc VAT)

Part Number: 576316

View Options

RTC1956 - Detent Spring for Land Rover Series - For Gear Syncro

£0.92(Exc VAT)

Part Number: RTC1956

View Options

232813 - Four Wheel Drive Gear Knob - Yellow - For Land Rover Series

£4.34(Exc VAT)

Part Number: 232813

View Options

5852 - Seal for Selector Spring on Shaft for Land Rover Series 2A & 3

£0.85(Exc VAT)

Part Number: 5852.AM

View Options

217476 - Lock Washer for Mainshaft for Land Rover Series - Fits 1948-1984 (Priced Individually)

£0.72(Exc VAT)

Part Number: 217476

View Options

553262 - Bell Housing Grommet for Land Rover Series 2A - 2.25 - Fits from Suffix E

£13.21(Exc VAT)

Part Number: 553262.G

View Options

90622240 - Rear Output Shaft Oil Seal for 4 Speed V8 Gearbox - Range Rover Classic, Series 3 and Defender

£2.22(Exc VAT)

Part Number: 90622240.AM

View Options

FRC1387 - O Ring for Gear Lever on Land Rover Series 2, 2A & 3

£0.36(Exc VAT)

Part Number: FRC1387

View Options

56102 - Spring for Reverse Selector Shaft on Land Rover Series 2A & 3 (Comes as a Single Piece)

£2.03(Exc VAT)

Part Number: 56102.G

View Options

334189 - Grommet / Rubber Plug For Transmission Tunnel Cover - Fits Land Rover Series 2, 2A & 3 including Lightweight

£5.17(Exc VAT)

Part Number: 334189.AM

View Options

FRC2046 - Gear Lever for Land Rover Series 2, 2A and 3

£30.43(Exc VAT)

Part Number: FRC2046

View Options

571175 - Oil Seal for Front Output Shaft - V8 4 Speed Gearbox - Defender and Land Rover Series

£2.03(Exc VAT)

Part Number: 571175

View Options

623055 - Speedo Cable for Land Rover Series 3 - Left Hand Drive

£9.73(Exc VAT)

Part Number: 623055

View Options

LRC1789 - Engine and Gearbox Mounting Kit for Land Rover Series - Petrol 2.25 Models - Includes Nuts and Washers

£12.63(Exc VAT)

Part Number: LRC1789 (Supersessions: NRC2054 > NRC2053 > LRC1789)

View Options

FRC5091 - Gear Lever Knob for Range Rover Classic and 109 V8 Land Rover Series

From£20.96(Exc VAT)

Part Number: FRC5091

View Options

TRS1114L - Seal / O Ring for Selector Shaft on Land Rover Series 2A & 3 - Comes as Single Seal

£1.01(Exc VAT)

Part Number: TRS1114L.AM

View Options

RTC1412 - Bearing for Rear Layshaft on Land Rover Series 3 Gearbox

From£8.23(Exc VAT)

Part Number: RTC1412 (Supersessions: 55715 > RTC1412)

View Options

521328 - Thrust Washer for Intermediate Shaft on Land Rover Series 2A & 3

£14.95(Exc VAT)

Part Number: 521328.G

View Options

576703 - Selector Fork for 1st and 2nd Gear on Land Rover Series 2A & 3

£42.38(Exc VAT)

Part Number: 576703.AM

View Options

622045 - Gasket for Bell Housing on Land Rover Series 2A & 3

£0.74(Exc VAT)

Part Number: 622045.AM

View Options

55638 - Pin for 1st and 2nd Selector Shaft on Land Rover Series 2A & 3 (Comes as Single Pin)

£0.85(Exc VAT)

Part Number: 55638.AM

View Options

DA3361 - Gearbox Bearing Kit for Land Rover Series 2A

£50.06(Exc VAT)

Part Number: DA3361.AM

View Options

301437 - Land Rover Series Gaiter / Boot for Main Gear Lever - Series from 1950-1984

£3.19(Exc VAT)

Part Number: 301437.AM

View Options

55714 - Bearing for Primary Pinion for Land Rover Series 3 Gearbox

£15.92(Exc VAT)

Part Number: 55714

View Options

BH605121L - Bolt for Inspection Plate on Land Rover Series 2A & 3 Gearbox - 5/16 UNF x 1 1/2)

£0.62(Exc VAT)

Part Number: BH605121L.G

View Options

7014 - Bush for Gearbox to Chassis Tie Rod on Land Rover Series - Priced Individually

£1.62(Exc VAT)

Part Number: 7014.AM

View Options

FRC2047 - Gear Lever - Left Hand Drive Land Rover Series - Fits 1958-1984

£30.43(Exc VAT)

Part Number: FRC2047

View Options

LRC10891 - Gear, Transfer and Four Wheel Drive Selector Knob, Gaiter Set and Pedal Rubbers - Land Rover Series 2, 2A and 3

£29.99(Exc VAT)

Part Number: LRC10891

View Options

RTC1962 - Thrust Washer for 3rd Gear - 0.125' - For Series 2 & 2A Land Rover

From£3.92(Exc VAT)

Part Number: RTC1962

View Options

267572 - Thrust Washer for 2nd Gear - 0.125' - For Land Rover Series 2A & 3

£9.02(Exc VAT)

Part Number: 267572

View Options

540870 - Drain Plug for Land Rover Series 2A & 3 Gearbox (Comes as Single Plug)

£5.84(Exc VAT)

Part Number: 540870.AM

View Options

593619 - Bearing for Mainshaft Primary Pinion - Land Rover Series 3

From£15.91(Exc VAT)

Part Number: 593619

View Options

90214787 - Oil Seal for Land Rover Series Clutch Cross Shaft - Fits from 1948-1971

£8.14(Exc VAT)

Part Number: 90214787.AM

View Options

LRC10855 - Gear, Transfer and Four Wheel Drive Selector Knob & Gaiter Set - Land Rover Series 2, 2A and 3

£25.00(Exc VAT)

Part Number: LRC10855

View Options

RTC1957 - Split Spring Ring for 3rd Gear on Land Rover Series 3 Gearbox (Comes as Single Unit)

£1.62(Exc VAT)

Part Number: RTC1957.G

View Options

1645 - Mainshaft Bearing for Land Rover Series 3 Gearbox

From£6.69(Exc VAT)

Part Number: 1645

View Options

232565 - Retaining Plate for Speedo Drive on Land Rover Series - Fits 1950-1984

£7.78(Exc VAT)

Part Number: 232565

View Options

536803 - Clevis Pin for Clutch Cross Shaft on Series 2A Land Rover - 1948-1971

£1.09(Exc VAT)

Part Number: 536803.AM

View Options

591362 - 1st Gear on Mainshaft for Land Rover Series 3 - Fits Vehicles up to Suffix B - ONE IN STOCK - CLEARANCE

£88.56(Exc VAT)

Part Number: 591362.AM

View Options

239272 - Land Rover Series Gearbox Split Ring Halves Layshaft - Fits 1948 to 1964 (Comes as a Pair of Halves)

£8.36(Exc VAT)

Part Number: 239272.AM

View Options

267575 - Thrust Washer for 2nd Gear - 0.135' - For Land Rover Series 2A & 3

£9.02(Exc VAT)

Part Number: 267575G

View Options

50703 - Thrust Washer for 3rd Gear - 0.130' - For Series 2 & 2A Land Rover - OEM Equipment

£9.40(Exc VAT)

Part Number: 50703G

View Options

146 Products

Sort by:

LR's Unique Selling Points

40 Years Experience

Family run business with over 40 years of experience in the Land Rover industry.

Extensive Product Catalogue

Over 200,000 parts in our catalogue.

Reliable Delivery

Reliable and cost-effective Worldwide Shipping.

Top Rated Reviews

We have over 13,000 reviews rated Excellent on Trustpilot.

Latest Blog Posts

GuideDefender

How to fit Defender headlamps

Fraser5 Dec 2025

When you're fitting headlamps to your Land Rover, knowing the differences between LED and standard models will make the job much easier. LED headlamps have mounting points cast directly into the body, whilst standard lamps use small raised bridges to secure the bezel frame.

GuideDefender

Product Guide for Land Rover Defender Urban Seats by Exmoor Trim

Fraser25 Nov 2025

I've decided to upgrade my Defender with heated seats, and I'm taking you through the entire installation process. The kit comes with everything you need, including dual heat switches, wiring looms, and relays that connect directly to the battery. Whilst modern Defenders have fuse boards for this sort of thing, we're doing it the old-school way with a direct battery connection.

GuideDefender

Product Guide for Heavy Duty Aluminium Sills for Land Rover Defender 90 - by Mantec

Fraser19 Nov 2025

I'm replacing the old side seals on my Defender 90 with the heavy-duty Mante one-piece versions. If you're planning to remove your side steps, you need to take off the side seals first because it gives you much better access to all the fixings. The process involves dealing with some corroded bolts, but there's a simple trick that makes it easier.

Land Rover Series 2 & 2A & 3 Gearbox

LR's Unique Selling Points

40 Years Experience

Extensive Product Catalogue

Reliable Delivery

Top Rated Reviews

Latest Blog Posts

Join the LR VIP club