LR301B – Mantec 30mm Black Hub-Centric Wheel Spacers – Defender 1984–2016, Discovery 1 and Range Rover Classic – Set of Four

Give your Land Rover a wider, more aggressive stance while improving stability with this set of four 30mm black aluminium wheel spacers from Mantec.

Each spacer is hub-centric and bolts directly to the vehicle’s existing hub using the supplied hardware. No cutting, replacement studs or other modifications are required. With one 30mm spacer fitted to each wheel, the vehicle’s overall track is increased by approximately 60mm.

We have sold thousands of these Mantec wheel spacers without experiencing quality problems. Fraser has also fitted them to every LR Parts Defender project we have undertaken, making these a product we can recommend from genuine experience.

Why fit 30mm wheel spacers?

• Creates a wider, more purposeful stance

• Improves vehicle stability through the increased track width

• Positions the wheels further out beneath the arches

• Hub-centric construction locates each spacer accurately on the vehicle hub

• Black finish works particularly well with black steel and alloy wheels

• Proven product used on LR Parts’ own Defender projects

Vehicle fitment

Fits:

• Land Rover 90, 110 and Defender from 1984–2016

• Land Rover Discovery 1

• Range Rover Classic

• Standard Defender Wolf steel wheels

Will not fit:

• Land Rover Discovery 2

• Range Rover P38

• New Defender L663 from 2020 onwards

Technical specifications

Specification	Detail
Manufacturer	Mantec
Quantity	Set of four
Spacer width	30mm per wheel
PCD	5 × 165.1mm
Centre bore	113.05mm
Stud thread	M16 × 1.5
Construction	Aluminium
Design	Bolt-on, hub-centric
Finish	Black
Overall track increase	Approximately 60mm

Kit contents

• 4 × 30mm black Mantec hub-centric wheel spacers

• 20 × pre-fitted wheel studs

• 20 × spacer securing nuts

Fitting information

These spacers bolt directly to the existing hubs without cutting, replacing the original studs or making any other vehicle modifications.

Wheel spacers are safety-critical components and should be installed by a competent person. All fixings should be tightened correctly during installation and checked again after the first 50 miles of driving.

Frequently asked questions

Will these spacers fit Defender Wolf steel wheels?

Yes. LR301B wheel spacers are compatible with standard Defender Wolf steel wheels.

Does the price include one spacer or a complete vehicle set?

This listing is for a complete set of four spacers—one for each wheel. The required pre-fitted studs and securing nuts are included.

Will I need to cut or replace my existing wheel studs?

No. These spacers bolt directly onto the existing hubs with no cutting, replacement studs or other modifications required.

How much wider will they make my Defender?

Each wheel is moved outwards by 30mm, increasing the vehicle’s total track width by approximately 60mm.

Will they fit the new Defender from 2020 onwards?

No. These spacers fit the classic Defender from 1984–2016. They will not fit the L663 New Defender introduced in 2020.

Do the securing nuts need to be checked after fitting?

Yes. The fixings should be checked again after the first 50 miles of driving.

Why do LR Parts recommend Mantec spacers?

We have sold thousands of these spacers without experiencing quality problems. They have also been fitted to every LR Parts Defender project undertaken by Fraser, so our recommendation is based on direct experience rather than simply repeating the manufacturer’s claims.

Please note: Designed for models with disc brakes. Early vehicles with rear drum brakes may experience clearance issues, and fitment cannot be guaranteed.

These spacers will not fit any defenders built after 2016. If you are looking for spacers for the "new" Defender, they can be found HERE