LR301 – Mantec 30mm Silver Hub-Centric Wheel Spacers – Defender 1984–2016, Discovery 1 and Range Rover Classic – Set of Four

Increase your Land Rover’s track width and create a wider, more stable stance with this complete set of four silver 30mm wheel spacers from Mantec.

The hub-centric design locates each spacer accurately on the existing hub, while the bolt-on installation requires no cutting or replacement of the vehicle’s original wheel studs. Fitting one 30mm spacer to each wheel increases the overall track by approximately 60mm.

The silver finish provides a cleaner, more understated appearance, particularly when fitted behind silver or unpainted alloy wheels.

LR Parts has sold thousands of Mantec wheel spacers without experiencing quality problems. They have also been used on every LR Parts Defender project undertaken by Fraser, giving us direct experience of their fit, finish and reliability.

Key benefits

• Widens the vehicle’s stance by 30mm at each wheel

• Improves stability through the increased track width

• Produces a wider, more purposeful appearance

• Hub-centric construction for accurate location on the vehicle hub

• Silver finish suits lighter-coloured and silver wheels

• No cutting or replacement wheel studs required

• Proven on LR Parts’ own Defender projects

Vehicle fitment

Fits:

• Land Rover 90, 110 and Defender from 1984–2016

• Land Rover Discovery 1

• Range Rover Classic

• Standard Defender Wolf steel wheels

Will not fit:

• Land Rover Discovery 2

• Range Rover P38

• New Defender L663 from 2020 onwards

Technical specifications

Specification	Detail
Manufacturer	Mantec
Quantity	Set of four
Spacer width	30mm per wheel
PCD	5 × 165.1mm
Centre bore	113.05mm
Stud thread	M16 × 1.5
Construction	Aluminium
Design	Bolt-on, hub-centric
Finish	Silver
Overall track increase	Approximately 60mm

Kit contents

• 4 × 30mm silver Mantec hub-centric wheel spacers

• 20 × pre-fitted wheel studs

• 20 × spacer securing nuts

Fitting information

The spacers bolt directly onto the existing vehicle hubs. No cutting, replacement of the original studs or other modifications are required.

Because wheel spacers are safety-critical components, installation should be completed by a competent person. All fixings must be tightened correctly and checked again after the vehicle has covered its first 50 miles.

Frequently asked questions

Are these supplied as a complete set?

Yes. The listing includes four spacers, 20 pre-fitted studs and 20 spacer securing nuts—everything required for all four wheels.

Will they fit standard Defender Wolf wheels?

Yes. These Mantec spacers are compatible with standard Defender Wolf steel wheels.

Is any modification required?

No. The spacers bolt directly to the existing hubs without cutting or replacing the original wheel studs.

How much do the spacers increase the track width?

Each spacer moves its wheel outwards by 30mm. Across the axle, this increases the track width by approximately 60mm.

Do they fit a Discovery 2 or Range Rover P38?

No. They fit Discovery 1 and Range Rover Classic models. Discovery 2 and Range Rover P38 models use different fitments.

Will they fit a 2020-onwards Defender?

No. These are for the traditional Defender produced from 1984–2016 and will not fit the L663 New Defender.

When should the fixings be checked?

The spacer and wheel fixings should be checked after the first 50 miles of driving.

Why choose Mantec wheel spacers?

LR Parts has sold thousands of these spacers without experiencing quality issues. Fraser has also selected them for every LR Parts Defender project, giving us first-hand confidence in the product.

Please note: Designed for models with disc brakes. Early vehicles with rear drum brakes may experience clearance issues, and fitment cannot be guaranteed.

 

These spacers will not fit any defenders build after 2016. If you are looking for spacers for the "new" Defender, they can be found HERE