SPF0128K - NTC1773 - SuperPro Bush Kit for Rear A Frame on Defender - Rear A-Frame to Chassis Bushes, SuperPro, All up to Early PUMA, 3/4 UNF

1 x SuperPro Polyurethane A-Frame to Chassis Bush Kit

Part Number:- SPF0128K Rear A-Frame to Chassis Bushes, SuperPro, all up to Early PUMA, 3/4 UNF
(Equivalent to NTC1773)

Weight:- 0.4KG

Manufacturer:- SuperPro

Fits:- All Defender 90, 110, 130 Upper A-Frame Arms up to Early PUMA (3/4 UNF Bolts)

This kit will fit all up to and including TD5

**NOTE** Puma owners please check your Upper A-Frame Arms, early PUMA’s either have the Bolt On “Crows Feet” brackets on the A-Frame Cross Member or the brackets are welded onto the Cross Member, these Bushes use 3/4UNF Bolts, this is on years 2007 to approx 2009. Please check your Chassis Number is to 9A766382 
2009 onwards do not have the Bolt On brackets, the brackets are welded onto the A-Frame Cross Member but use M16 Bolts, the part number you need to order for the later kit is SPF0128AK (Chassis No 9A766383 onwards)
If you are unsure then you must check and measure your Upper A-Frame Bolts to see if they are 3/4 UNF (EARLY) or M16 (LATE)

A bolt kit may be required due to the condition of the original bolts fitted to the vehicle. We can also supply a bolt kit for the above bushes, Part Number:- GL1212

These polyurethane bushes from SuperPro are considered to be the best aftermarket bushings available for Land Rovers. The “OEM” and “G” bushings do not match up to the same quality as the original Production Line Genuine bushes that were used when the Defender was still in production. Nowadays, it is becoming increasingly difficult to find high-quality Genuine bushes. That is why we are using SuperPro bushings as the best available alternative