LRC10426 - Galvanised Door Set - Front and Second Row - Left and Right - Land Rover Defender 1983-2006

Kit includes:

1x BFL710020GALV Rear RH Door

1x BFL710030GALV Rear LH Door

1x BDA710020GALV Front RH Door

1x BDA710030GALV Front LH Door

These are manufacture in England with the company spending a lot of time making these as accurate to the original Land Rover product. This is to ensure a great fit every time.

The steel frame is hotted dipped galvanised with a zinc plated steel skin - this not only increases the strength of the overall door, but is a lot more corrosion resistant so you will not get the white bubbling corrosion you get with aluminium.

Each component of the door is lovingly pressed and worked to create the final product that is our eyes is a work of art and designd to still be here in many years to come. We have always found it a shame to do nice work on a Defender, only to find out a standard spec door has already started to rust out within a couple of years, so you end up having to repeat the process all over again, hence why we these have been manufactured to be the best possible door available.

In between the skin and the frame, we use marine bonding to stop the two surfaces rubbing together. This stops any drumming effect & makes the door feel a lot stronger & tighter all around.

Every threaded hole is clear of zinc and the hinges holes are drileld clear of zinc so this door is a straight swap over ofr your original part.

These doors are the exact spec of doors fitted to approx 2001-2006 defenders

They are exactly the same in every way as 1984-2001 push button doors however the 2 lower mounting points for the inner window winding panels are in a different position. We have added a picture to show the difference. So for fitting this door to the earlier spec models we have made a bracket kit which allows for the fitting of the earlier pre 2001 inner panel to later doors. The best part is that it is a simple bolt on job utilising threaded holes already in the doors so to replace a pre 2001 door is still a nice simple bolt on job. The part number for our bracket kit is JWP520. You need one kit per door.