GL2001 - Explorer Old Man Emu Front +2 inch Pin/Pin Shock – Single, GL2001

1 x OLD MAN EMU Nitrocharger Sport Plus 2 Inch Front Pin/Pin Shock

Part Number:- GL2001, Explorer Old Man Emu Front +2 Inch Pin/Pin Shock – Single

Manufacturer:- Old Man Emu

Weight:- 3.3kg

Fits:- Defender 90, 110, 130 / Discovery 1 / RRC

Shock Length open:- 593mm
Shock Length closed:- 349mm
Main Body Diameter:- 55mm
Plastic Shroud Diameter:- 66mm

These OME Shock Absorbers fit Standard Heigh Front Turrets. – GL1056

GL2001 Old Man Emu Front +2 Inch Pin/Pin Shock are used in our Explorer Suspension kit which is designed for those looking to improve the suspension performance of their Defenders which are used on the road and off road.

+2 inch Shocks – These can be fitted…
• With or without Anti Roll Bars fitted
• Standard Ride Height up to 3” Lift

As these shock absorbers are longer travel than standard extended Brake Hoses will be required along with, Spring Retainers and spring Re-locators and if fitted with a lift Spring you will need Extended Bump Stops.

They come ready assembled with the bushes and our bush isolation washers on each end,(these bush isolation washers are very important, to help stop the pin of the shock wearing away, all our shocks come with them ready fitted)

The OME Sport Shocks are designed to provide a superior ride and handling experience compared to other shock absorbers. This is thanks to the multi-stacked rebound and compression valving, once the shock is compressed it is hard to pull back out. This feature helps to prevent body roll and bounce, while still maintaining a comfortable ride both on and off the road.

If your Defender 90 is very light on the rear and you do not carry any extra weight and you would like more comfort, you could use these GL2001 Pin/Pin front shock absorbers on the rear as these are a much softer valved, you will need our GL1171 Pin/Pin shock mounts to fit them.