Sign Up
- Home
- DA1998 - Dinitrol 900 Rust Convertor - 400ml Aerosol (Only for UK Sales)
DA1998 - Dinitrol 900 Rust Convertor - 400ml Aerosol (Only for UK Sales)
Available to Order (Typically Dispatched Within a Few Business Days)
Part Number: DA1998.G
£43.75(Exc VAT)
£52.50(Inc VAT)
Product Information
Product Description
Specialist rust convertor & primer
The specialist rust converter contains a complex organic chelat base and epoxy resin. DINITROL RC 900 actively converts rust on substrates into a stable organic iron complex. Once the product is dry, an impermeable barrier against further corrosion is formed. DINITROL RC 900 penetrates rust 7 to 10 times deeper than standard rust converters. The product forms a strong dry adhesive film that provides a suitable base for paintwork and other corrosion protection products. (1 x 400ml aerosol can supplied or 12 if the full box is purchased)
Characteristics
DINITROL RC 900 forms a dry and strong adhesive film which is suitable as a base for paintwork and other corrosion protection products.
Areas of Application
DINITROL RC 900 has been developed for use on oxidised iron parts.
Method of Use
Remove rust, grease and dirt with a wire brush, sand paper or a sandblasting process. Rust and scale may only be visible as slight shading. In addition to rust, the steel must also be free from dust and grease. Carefully clean with acetone or lacquer thinner. Shake the spray can well. The product should be applied in several successive coats, at a distance of approx. 25 cm. The metal temperature should not be below 10°C. The material is dust-dry after one hour; if necessary, a further coat can be applied.
Specifications
> Colour: amber-coloured solution
> Film type: hard
> Density: 0.9 g/cm³
> Viscosity: ~ 118 cm centistokes
> Solids: 16%
> Empfohlene Schichtstärke: 130 µm
> Yield: ~ 60 g/m² per coat
> Drying time: 24 hours at 20°C
> Storage time: 18 months (between 15°C and 25°C)
FAQ's
If you have any questions about this product or any of the products in our range, please contact us on sales@lrparts.net or contact our main centre on: 0151 486 0066.
Delivery
Fast, reliable delivery is an important part of the service we provide, which is why approximately 99% of LR Parts orders are shipped with DHL.UK Delivery – £5 + VAT
We offer a simple flat UK delivery rate of just £5 + VAT, calculated automatically at checkout.
The actual cost to us of using DHL is often higher than the amount we charge our customers, but we've deliberately chosen to subsidise the difference rather than move to a cheaper delivery service.
With around 1,800–2,000 orders leaving LR Parts every week, we know how important the final stage of an order is. Whether you've ordered a small service part or an expensive component needed to get your Land Rover back on the road, we want it travelling through a delivery network we trust.
That's why DHL is our first choice rather than simply the cheapest option.
Where an individual product carries an additional delivery surcharge due to its size, weight or handling requirements, this is clearly shown on the product page before you order.
International Delivery – No Unexpected Charges on Arrival
LR Parts supplied customers in 158 countries in the last 12 months, and we work with Global-e to make ordering from outside the UK as straightforward as possible.
For international online orders, your delivery charge, applicable local taxes and import duties are calculated during checkout and paid as part of your order.
This means you can see the total landed cost before you buy.
There are no additional customs duties or taxes to pay when your order arrives.
Your order is still picked and packed by our team in Liverpool, with the vast majority of international shipments travelling through DHL's worldwide delivery network.
Simply add your parts to the basket, select your destination and the checkout will calculate the applicable delivery, duties and taxes for you.
Have a question?
Contact Us
