DA1905 - LubeGuard Gear Fluid Supplement - 273ml - For Use in Manual Transmissions, Transaxles and Final Drives that Require Gear Oil

Lubegard® Gear Fluid Supplement is designed for use in all manual transmissions, transaxles and final drives that require gear oil. Lubegard® contains LXE®, (liquid wax esters) and their derivatives, a blend of high grade petroleum oil, synthetic base oils and a complete anti-wear formula. Lubegard® is designed to provide high temperature stability to prevent harmful deposits on synchros and gears. For Use In All Manual Transmissions, Manual Transaxles And Final Drives That Require Gear Oil

> Reduces drive train power loss
> Lowers temperature and extends fluid life
> Improves heat transfer from the fluid to the case wall and out the gear box
> Improves all cold weather stiffness
> Improves all manual & synchromesh transmission shifting characteristics
> Reduces tooth drag and absorbs shock loads, thus improves the life of all gear units
> Lowers friction on bearings and gears with high wiping stresses, especially hypoid gears
> Minimizes oxidation and varnish deposits
> Suppresses lubricant foaming
> Safe for new MTF Fluids
> Increases power transfer, reduces energy consumption
> Decreases equipment operating and maintenance costs

Lubegard® Gear Fluid Supplement Provides:

More Power
> Reduces back-lash frictional (i.e. tooth) drag in differentials allowing more horsepower to the wheels.
Lower Operating Temperatures
> Reduces rolling and sliding friction in the gears.
> Reduces friction between the bearing rolling elements and their separators.
> Improves heat transfer from the fluid to the case wall and out of the gear box.
Longer Equipment Life
> Reduces wear on gears and rolling elements.
> Lowers operating temperature and prolongs fluid life.
> Enhances the stability of the gear oil.
> Contains no shear-sensitive viscosity components.
> Will not cause sludge or varnish.
> Contains no harmful solid lubricants or corrosive chemical enhancers.
Economy
> Ratio used is at 3 fluid oz. to a quart = 1 part in 10.
> Saves on downtime by extending gear fluid changes.