Home
CKMTP12 - Portable Twin Compressor by ARB

CKMTP12 - Portable Twin Compressor by ARB

Available to Order (Typically Dispatched Within a Few Business Days)

Part Number: CKMTP12.G

£706.55(Exc VAT)

£847.86(Inc VAT)

Product Information

12 volt

The ARB CKMTP12 portable air compressor is a compact sized yet high performance compressed air source that is intended for rapid inflation of large tyres and operation of most air powered tools rated up to 85LPM (3CFM) @ 600kPa (90PSI).

The ARB CKMTP12 is a world class recreational product designed and built to commercial / industrial standards boasting the following features:

> High flow, twin motor, dual cylinder, portable 12V DC air compressor with 4L air tank, 6m durable high temp air hose, inflation accessory kit and air blow gun
> Ultra-compact twin motor with dual cylinder design makes this the highest flowing portable compressor of its size on the market at 174LPM (6.16CFM)
> Integrated aluminium air tank and pressure switch regulates pressure between 930kPa (135PSI) and 1030kPa (150PSI) suited to most air powered tools.
> Mounted in a waterproof carry case constructed from a durable impact resistant polymer. The carry case has convenient compartments for storing the air hose and other compressor accessories.
> Ducted IP55 sealed brushed DC cooling fan and anodized aluminium motor mounting brackets effectively dissipate heat from the motors, heads and electronics allowing for a 100% duty cycle (under room temperature conditions).
> Engineered, built and individually dyno-tested in Australia from local and important components.
> Fully serviceable and all replacement parts available.
> Constructed primarily of light weight, high strength engineering grade materials, including military and aerospace standard components.
> Hard-anodized cylinder bores and PTFE (Teflon) impregnated carbon fiber piston seals for reduced friction and maximum trouble free life.
> Built with sealed components for moisture and dust resistance.
> Motors are 100% ball bearing equipped, and feature a unique linear brush pre-load system for extra long life, low heat and quiet operation throughout the life of the unit.
> Compressor pistons are equipped with high shock rated roller bearing.
> High density and high flow washable sintered bronze air filter element.
> Motors are thermal cut-out protected against damage caused by extreme temperature use.

Net Weight - 15kg
Dimension - (W x H x L) 355 x 186 x 478
Type - Twin Compressor
Tyre Inflation - Fastest
DC Voltage - 12V
Duty Cycle to [%] - 100%
Pressure to - 0kPA
Current rating at 20°C - 28.4A
Volume Flow Up To - 174.4 l/min
Pressure to [kPA] - 200
Current rating at 20°C - 50.4A
Volume Flow Up To - 131.8 l/min
Switch - With pressure differential switch
Overheating Protection - Yes
Filter Type - Particulate Filter

FAQ's

If you have any questions about this product or any of the products in our range, please contact us on sales@lrparts.net or contact our main centre on: 0151 486 0066.

Delivery

Fast, reliable delivery is an important part of the service we provide, which is why approximately 99% of LR Parts orders are shipped with DHL.UK Delivery – £5 + VAT

We offer a simple flat UK delivery rate of just £5 + VAT, calculated automatically at checkout.

The actual cost to us of using DHL is often higher than the amount we charge our customers, but we've deliberately chosen to subsidise the difference rather than move to a cheaper delivery service.

With around 1,800–2,000 orders leaving LR Parts every week, we know how important the final stage of an order is. Whether you've ordered a small service part or an expensive component needed to get your Land Rover back on the road, we want it travelling through a delivery network we trust.

That's why DHL is our first choice rather than simply the cheapest option.

Where an individual product carries an additional delivery surcharge due to its size, weight or handling requirements, this is clearly shown on the product page before you order.

International Delivery – No Unexpected Charges on Arrival

LR Parts supplied customers in 158 countries in the last 12 months, and we work with Global-e to make ordering from outside the UK as straightforward as possible.

For international online orders, your delivery charge, applicable local taxes and import duties are calculated during checkout and paid as part of your order.

This means you can see the total landed cost before you buy.

There are no additional customs duties or taxes to pay when your order arrives.

Your order is still picked and packed by our team in Liverpool, with the vast majority of international shipments travelling through DHL's worldwide delivery network.

Simply add your parts to the basket, select your destination and the checkout will calculate the applicable delivery, duties and taxes for you.

Have a question?