RES15O25W - Indicator Ballast Resistor - Enables LED Lights to be fitted to Range Rover L322, Sport, Discovery 3 and Freelander 2
If you want to fit rear LED lights to your vehicle then you will need to fix the indicator flash problem. This is a PAIR of 15 Ohm Resistors that trick the ECU into thinking that original rear lights using normal bulbs are fitted rather than LEDs which draw less current. By adding this resistor ACROSS the earth ( Pin 1 / brown ) and the indicator signal wire ( Pin 5 ) this then makes the ECU and flasher unit think that all is OK.
This resistor will also stop the check indicator bulb message that can display in the dash. We would recommend that 20 Ohm resistors are used in the headlights if you are also doing this conversion - see our other items for these. The terminals provided are ideal for soldering short wires to and have 2 mounting holes if required.
If you have any questions about this product or any of the products in our range, please contact us on email@example.com or contact our main centre on: 0151 486 0066
Our delivery is very easy. We use flat rate fees across all our orders and this is calculated at the checkout. In some cases and normally with International orders we may not be able to calculate delivery fees automatically. Our system will allow you to order the products with free delivery, so you can guarantee the stock / order items. Our team will obtain the best and most price economical quote from a range of delivery suppliers and email you a link to our site to pay for delivery.