EXT009-25 - Defender Heavy-Duty Moulded Mat System in Black by Exmoor Trim - For Puma Defenders from 2007
PLEASE NOTE: Certain Exmoor Trim items have to be made to order and can take around 4-6 weeks to produce. Please contact our sales staff on firstname.lastname@example.org if you want an estimated time of delivery before ordering if this is a problem.
This is the only front matting system available that is approved by Land Rover and the Ministry of Defence. This kit has proved itself to be up to the job time and time again. Supplied as a 2 piece kit in Black with the floor & tunnel in one piece with the seat box totally covered. Approved matting at Millbrook testing ground and reduces the noise and heat levels in the front to below required safety standards.
The seat box section will require cutting to allow access to the storage sections and gear box access plate. You will also need to clear the holes to suit your vehicles required seat mounting points or any other equipment you may have installed.
The Black Moulded Matting System has been specifically designed to increase ride comfort by greatly reducing heat and road noise. The 2 piece matting system is manufactured entirely from black cast dense polyurethane using precision injection mould tooling.
The black floor matt is a one piece floor section that covers the driver's / passenger's foot-wells and the gearbox tunnel. This design feature ensures maximum soundproofing and heat suppression.
The black one piece seat box cover encases the 3 open sides of the seat box to also greatly reduce noise and heat. Once the supplied firewall section is installed sound and heat reduction will be drastic.
The kit is available for Series IIs & IIIs standard gearbox and for all Defenders both with *LT77, R380 and *ZF Automatics & the new Puma
*NOTE: Some trimming is required when installing the Black Moulded Matting Systems in 90s and 110s and the seat box cover is one piece and will require specific fitting.
Exmoor Trim also offers a kick plate and seat box soundproofing rubber hardura kit with an acoustic foam backing as originally fitted to Defenders. This is a great and very simple kit to install with good acoustic properties and great value as an alternative option.
Water repellent - Flame retardant- Black spec - Supplied as a 2 piece kit - Extra thick cast rubber on average1/2" thick - The whole mat is one piece from one side to the other - The bulkhead section is simple to install and is held in place by floor section - The driver's and passenger's foot well have noise suppression foam panels underneath - The seat box section is also one piece and will require cutting to suit your particular vehicle
If you have any questions about this product or any of the products in our range, please contact us on email@example.com or contact our main centre on: 0151 486 0066
Our delivery is very easy. We use flat rate fees across all our orders and this is calculated at the checkout. In some cases and normally with International orders we may not be able to calculate delivery fees automatically. Our system will allow you to order the products with free delivery, so you can guarantee the stock / order items. Our team will obtain the best and most price economical quote from a range of delivery suppliers and email you a link to our site to pay for delivery.
customer service team